Satel-Lp24

LP2400

• Licence free 2.4 GHz

• Designed for global use

• For short-range, clear line-of-sight applications up to 5 kilometres

• Easy, software-free configuration

• FHSS (Frequency Hopping Spread Spectrum)

• Licence-free ISM (Industrial, Scientific and Medical) band

• Up to 32 I/O modules can be attached to a single radio module via T-BUS

• Mesh networks of up to 250 devices

• DIN rail mountable

• Satel order code: YM0424



 Datasheet 

 Package slip 

 User manual 



Technical specifications

Frequency range

2.4002...2.4785 GHz

Sensitivity/Carrier power

-106dBm / 100 mW* ( in Europe max. is 19 dBm

Interface

T-BUS ( for extension units) RS-232, RS-485

Data speed

Radio 250kbps / RS 115,2kbps

Operating voltage

+19,2 ... +30,5 Vdc

Power consumption

≤ 65 mA (@ 24 V DC, @ 25°C, stand-alone)

Size/Weight

WxHxD 17.5 mm x 99 mm x 114.5 mm / 197 g

Connectors

RSMA(n) / screw connections (incl. DIN rail connector)

Please note:

The use of products described in the SATEL-LP range is oriented exclusively to qualified electricians or persons instructed by them, who are familiar with applicable standards and other regulations regarding electrical engineering and, in particular, the relevant safety concepts.

The devices are intended for application in industrial environments.The SATEL-LP wireless system is Class A equipment and may cause radio interference in residential areas. In this case, the operator may be required to implement appropriate measures and to pay the costs incurred as a result. Operation of the wireless system is only permitted if accessories available from Satel are used. The use of any other components may lead to withdrawal of the operating license. You can find the approved accessories for this wireless system listed with the item at www.satel.com.

Please note that, in combination with antennas, the maximum permissible transmission power may be exceeded. In this case, set the transmission power via the software.

For the latest country registrations, please visit www.satel.com. The devices comply with R&TTE device class 2, with the following restrictions on use according

Please read the manual carefully before purchase where you will find further reference to required regulations and installation notes.  XL Systems will not be held accountable for any resulting action caused by failure to take these notes into consideration.

© XL Systems 2014