TEL: 01883 622778

sales@xls.co.uk

 Pssst! We’ve got Secret Pre-Launch information

on the latest Radio Data Transceiver from

SATELLINE-EASy

ALL the SATEL features as the globally acclaimed 3AS but..

EASily selectable 70 MHz  tuning range

EASily change channel Spacing

EASily switch between 3AS/PCC/TrimTalk compatibility

EASier to keep stocks for your global customers

Order yours NOW- its EASy!

Download Poster (19 MB)

Download Manual (V2.1)

Same high standards of manufacture and reliability you’ve come to expect

Now you can roam the world with one unit and configure it to that countries regulations, easily keep stocks for your customers and have the same high standards of manufacture and reliability that you’ve come to expect from SATEL

SATELLINE-EASy is equipped with a wide, user selectable 70 MHz tuning range between 403...473 MHz.

Channel spacing is now user selectable as well, either 12.5, 20 or 25 kHz  and either +3...+9 Vdc or +6...+30 Vdc voltage level ranges ensure low power consumption. Thanks to the amazing receiver sensitivity, the output power of 1 W enables distances that go beyond similar products

SATELLINE-EASy is fully compatible with widely used and well known SATELLINE-3AS(d) radio modem family and can also be included in systems based on other manufacturers’ protocols.

SATELLINK additional equipment products are compatible with SATELLINE-EASy too.

 lots of user choices, just choose the settings, which are most suitable for your need!

SATELLINE-EASy complies with the following international standards:

o EN 300 113-2

o EN 301 489 (EMC-requirements)

o EN 60950 (Safety Standard)

o FCC CFR47 section 90

o EN 61000-4-3 (2006), 10V/m Immunity test

SATELLINE-EASyTechnical Spec

• Frequency Range 403...473 MHz

• Channel Spacing 12.5 kHz / 20 kHz / 25 kHz

• Tuning range 70 MHz

• Spurious Radiations < 2 nW EN 300 113 and CRF47 part90

• Frequency error tolerance < 1 kHz

• Sensitivity -114 dBm @ 12.5 kHz -111 dBm @ 25 kHz (BER < 10 E-3)  FEC ON See: Note 1

• Co-channel Rejection >-12 dB FEC ON

• Adjacent Channel Selectivity > 47 dB @12.5 kHz > 52 dB @ 25 kHz FEC ON

• Intermodulation Attenuation > 60 dB FEC ON

• Spurious Rejection > 60 dB FEC ON

• Spurious Emission < -100 dBm (Receiver) < -80 dBm on 3rd harmonics@1215 – 1240 MHz

• Power Consumption < 1.2 W <3 W @ 0.5W output power <7 W @ 1W output power

• Power Save Mode Consumption SLEEP State:0,24 W typical DTR: 0,005W

• Communication Mode Half-Duplex

• Type of Emission F1D (Transmitter)

• Carrier power 100, 200, 500, 1000 mW  (Transmitter)

• Adjacent Channel Power EN 300 113 and CRF47 part90  (Transmitter)

• Carrier power stability < 1.5 dB (Transmitter)

DATA MODEM

• Timing RS-232

• Electrical Interface PORT 1:RS-232 (fixed) PORT 2: RS-232/RS-422, LVTTL, TTL PORT 2 functions are delivery options

• Interface Connector D-15 (female)

• Data speed of I/O-interface 300 – 38400 bps

• Data speed of Radio Interface 19200 bps (25 kHz channel) /9600 bps (12.5 kHz channel)

• Data Formats Asynchronous data

• Modulation 4FSK, GMSK, (PacificCrest, TRIMTALK *) (TRIMTALK is a trademark of Trimble Navigation Ltd.)

GENERAL

• DC input ranges Nominal voltage : +3 … +9 Vdc or +6 … +30 Vdc Full range: +3.2 … +8.5 Vdc or +6.5 … +28 Vdc +/-10%. (Delivery options)

• Temperature Ranges -30 C ... +65 C Functional -25 C ... +55 C Complies with standards, -40 C ... +80 C Storage

• Antenna Connector 50 ohm, U.FL

• Construction Aluminium housing - same as 3AS

• Size L x W x T 96 mm x 56 mm x 9 mm

• Weight 250 g

OTHER MEASUREMENTS

• ESD-failure threshold 8 kV contact, 15 kV air discharge

• Immunity test 10V/m

Note 1

This site uses Adobe .pdf files for more information go to www.adobe.com